PORCELANOSA P83202921 Manuel d'utilisation et d'entretien

Naviguer en ligne ou télécharger Manuel d'utilisation et d'entretien pour Non PORCELANOSA P83202921. PORCELANOSA P83202921 Use and Care Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 10
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
3 421
344
Product prone to shade variations. The colour of the supplied material might not be exactly the same as the sample.
NOOHN STONE MOSAICS / TECHNICAL INFORMATION
NOOHN MOSAICS
1. PREPARING THE SUBSTRATE
Surfaces where the material is to be laid must be smooth and consistent,
and dry and clean. They should be levelled to create a white background,
using specic products for levelling layers thicker than 2mm. To keep the
levelling material in good condition, the environmental temperature must
be between 5ºC and 30ºC.
2. LAYING THE MOSAICS
To ensure that the mosaics are correctly laid, we recommend the use
of white One-Flex, a high-performance cement-based adhesive which
is specially designed for laying terracotta mosaics, stone mosaics, glass
mosaics and porcelain tiles. Use the smooth side of a notched trowel to
spread the adhesive evenly over the wall and then “comb” it with the
notched side (minimum notch size 3mm). The adhesive should not be
spread all at one go over large surfaces to prevent it from drying before
the mosaics are laid.
To lay the mosaic sheets, press them down evenly with a rubber trowel
and make sure that the distance between each sheet is the same as
the joint between the mosaic chips to ensure a uniform appearance
and joints of the same width. If there is a particularly big joint between
the sheets, separate some chips from the mesh backing with a sharp
instrument and rotate them to ensure more subtle gaps and an optimum
random pattern. Before grouting them, leave the adhesive to dry for at
least 24-48 hours. After this drying time has elapsed, clean the surface
with a moist cloth and leave to dry before grouting.
3. GROUTING (only applicable to mosaics with joint)
We recommend the use of Colorstuk Rapid, a fast setting grouting
mortar available in different colours, with an excellent mechanical
resistance, low water absorption and anti-fungal qualities. Colorstuk in
black or anthracite should not be used, as it may be difcult to clean
the tile joints. For polished surfaces prone to scratching, we recommend
Colorstuck especial n.
Application: Use a rubber trowel to spread the grout, making sure that
the joints are lled completely. Use the same trowel to remove any
surplus grout.
4. CLEANING
Use a sponge or cloth to remove any traces of adhesive before it sets.
It is important that the grout does not dry too hard as this may make it
difcult to clean the mosaic tiles. This operation should be repeated at
least two or three times until the mosaic tiles are thoroughly clean. Clean
the surface of the tiles well using a sponge or cloth.
The use of detergents or abrasives as cleaning agents may cause
irreversible damage. If you are not sure, please contact the manufacturer.
Vue de la page 0
1 2 3 4 5 6 7 8 9 10

Résumé du contenu

Page 1

3 421344Product prone to shade variations. The colour of the supplied material might not be exactly the same as the sample.NOOHN STONE MOSAICS / TECHN

Page 2

54-6 mm353Product prone to shade variations. The colour of the supplied material might not be exactly the same as the sample.TECHNICAL INFORMATION / N

Page 3 - NOOHN MOSAICS

3 4521345Product prone to shade variations. The colour of the supplied material might not be exactly the same as the sample.TECHNICAL INFORMATION / NO

Page 4

1 23455ºC-30ºC346Product prone to shade variations. The colour of the supplied material might not be exactly the same as the sample.GLASS TILES / TECH

Page 5

347Product prone to shade variations. The colour of the supplied material might not be exactly the same as the sample.TECHNICAL INFORMATION / NOOHN HE

Page 6

3 421348Product prone to shade variations. The colour of the supplied material might not be exactly the same as the sample.NOOHN MIX MOSAICS / TECHNIC

Page 7

349Product prone to shade variations. The colour of the supplied material might not be exactly the same as the sample.TECHNICAL INFORMATION / NOOHN FU

Page 8

3 4521350Product prone to shade variations. The colour of the supplied material might not be exactly the same as the sample.NOOHN METAL MOSAICS / TECH

Page 9 - 30%-65% HR

351Product prone to shade variations. The colour of the supplied material might not be exactly the same as the sample.TECHNICAL INFORMATION / NOOHN AT

Page 10

12 3 410ºC-27ºC2 mmmax.2 m30%-65% HR352Product prone to shade variations. The colour of the supplied material might not be exactly the same as the sam

Commentaires sur ces manuels

Pas de commentaire